郭文宏

國立虎尾科技大學資訊管理系 教授

 

Wen-Hung Kuo

Professor

Information Management Department

National Formosa University

E_mail: whkuo@nfu.edu.tw

Tel.: 05-6315733

 

學歷:國立清華大學工業工程學系

國立清華大學工業工程研究所碩士

國立清華大學工業工程學系博士

 

專長:生產排程、管理資訊系統規劃設計、系統模擬分析、人機介面設計

 

經歷:三陽工業股份有限公司                 工業工程課 助理工程師

     財團法人金屬工業研究發展中心    電腦應用組 副工程師

健行工商專科學校                         工管科 講師、助理教授兼科主任

嶺東技術學院                                資訊管理科  助理教授

南開技術學院                                工管科      助理教授兼科主任

大葉大學                                       工業工程學系 助理教授、副教授

國立虎尾科技大學                         資訊管理系   副教授、教授

                                                     

學術服務:

         European Journal of Operational Research, International Journal of Operational Research, Computers and Operations Research, Journal of the Operational Research Society,

          Information Processing Letters, Computers and Industrial Engineering, International Journal of Production Economics, International Journal of Systems Science, 4OR,

          Journal of Chinese Industrial Engineering, Optimization Letters, Asia-Pacific Journal of Operational Research, Annals of Operations Research, Omega, Optimization Letters,

         人因工程學刊,電子商務學報等  論文審查委員。

         國立屏東商業技術學院商業自動化學系 (91,7)   演講

         國立清華大學工業工程與工程管理學系 (94,12)  演講

          The 2006 IAENG International Workshop on Industrial Engineering             20-22   June, 2006,  Hong Kong              Co-chair & Committee member  

          The 2007 IAENG International Conference on Industrial Engineering            21-23 March, 2007, Hong Kong             Co-chair & Committee member

          The 2008 IAENG International Conference on Industrial Engineering           19-21 March, 2008, Hong Kong              Co-chair & Committee member

          The 2008 IAENG International Conference on Operations Research             19-21 March, 2008, Hong Kong              Committee member

          The 2009 IAENG International Conference on Industrial Engineering           18-20 March, 2009, Hong Kong              Co-chair & Committee member

          The 2009 IAENG International Conference on Operations Research             18-20 March, 2009, Hong Kong              Committee member

          The 2010 IAENG International Conference on Industrial Engineering           17-19 March, 2010, Hong Kong              Co-chair & Committee member

          The 2010 IAENG International Conference on Operations Research             17-19 March, 2010, Hong Kong              Committee member

          The 2011 IAENG International Conference on Industrial Engineering           16-18 March, 2011, Hong Kong              Co-chair & Committee member

          The 2011 IAENG International Conference on Operations Research             16-18 March, 2011, Hong Kong              Committee member

          The 2012 IAENG International Conference on Industrial Engineering          14-16 March, 2012, Hong Kong              Co-chair & Committee member

          The 2012 IAENG International Conference on Operations Research            14-16 March, 2012, Hong Kong              Committee member

          The 2013 IAENG International Conference on Industrial Engineering          13-15 March, 2013, Hong Kong              Co-chair & Committee member

          The 2013 IAENG International Conference on Operations Research            13-15 March, 2013, Hong Kong              Committee member

          The 2014 IAENG International Conference on Industrial Engineering          12-14 March, 2014, Hong Kong              Co-chair & Committee member

          The 2014 IAENG International Conference on Operations Research            12-14 March, 2014, Hong Kong              Committee member

 

 

研究計畫:

1. 製商整合資源中心

計畫主持人,執行期間:2001.1.1. ~ 2001.12.31. 補助單位:教育部顧問室

2. Knowledge Acquisitions for LCD Video Quality Assessment

計畫主持人,執行期間:2004.11.1. ~ 2005.9.30.,補助單位:中華民國台灣薄膜電晶體液晶顯示器產業協會 (A632TT6000-V22)

3. Optimal batch size and raw material ordering policy for a production system with a price-quantity discount rate

計畫主持人,執行期間:2004.11.1. ~ 2005.7.31.,補助單位:大葉大學 (ORD-9327)

4. 具有功能替代式機台且工作處理時間變異之雙階段流線型排程問題(1/2)

計畫主持人,執行期間:2005.8.1. ~ 2006.7.31.,補助單位:國科會 (NSC-94-2213-E-212-013)

5. 顯示器品質之物理特性與人因評價之關連研究(1)

計畫主持人,執行期間:2006.1.1. ~ 2006.10.31.,補助單位:中華民國台灣薄膜電晶體液晶顯示器產業協會 (A643TT6000-S12)

6. 具有功能替代式機台且工作處理時間變異之雙階段流線型排程問題(2/2)

計畫主持人,執行期間:2006.8.1. ~ 2007.7.31.,補助單位:國科會 (NSC-95- 2221-E-150-098)

7. 顯示器品質之物理特性與人因評價之關連研究(2)

計畫主持人,執行期間:2006.11.1. ~ 2007.9.30.,補助單位:中華民國台灣薄膜電晶體液晶顯示器產業協會 (A643TT6000-S22)

8. 具有學習效應之間歇式生產排程系統之研究

計畫主持人,執行期間:2007.8.1. ~ 2008.7.31.,補助單位:國科會 (NSC-96- 2221-E-150-060)

9. 學習效應在生產批次間完全傳遞模式之生產排程問題之研究

計畫主持人,執行期間:2008.8.1. ~ 2009.7.31.,補助單位:國科會 (NSC-97-2221-E-150-055)

10. 具有學習效應以及與過去順序相依準備時間之平行機台問題之研究

計畫主持人,執行期間:2009.8.1. ~ 2010.7.31.,補助單位:國科會 (NSC-98-2221-E-150-032)

11. 具有工作位置加權學習效應之生產排程研究(I)

計畫主持人,執行期間:2010.8.1. ~ 2011.7.31.,補助單位:國科會 (NSC-99-2221-E-150-039)

12. 具有與位置相關的工作處理時間之均衡流水式排程問題之研究

計畫主持人,執行期間:2012.8.1. ~ 2013.7.31.,補助單位:國科會 (NSC-101-2221-E-150-55)

13. 具有與工作獨立之退化效應以及含有部份維修工作的生產排程之研究

計畫主持人,執行期間:2013.8.1. ~ 2015.7.31, 補助單位:國科會 (NSC-102-2221-E-150-043-MY2)

 

期刊論文

1. Kuo, W.H. and Hwang, S. L., “ A prototype of a real-time support system in the scheduling of production systems,” International Journal of Industrial Ergonomics, 21, 133-143 (1998 Feb.). (SSCI)

2. Kuo, W. H. and Hwang, S. L., “ The study of a human-computer interactive scheduling system,” Journal of the Chinese Institute of Industrial Engineers, 15 (6), 533-543 (1998). (EI)

3. Kuo, W. H. and Hwang, S. L., “ The development of a human-computer interactive scheduling system,” International Journal of Computer Integrated Manufacturing, 12 (2), 156-167 (1999). (SCI)

4. Wang, C.H., Yang, D.L., Wu, T.H., Kuo, W.H., and Shih, N.H., “ Impact of inspection errors on the lot size problem,” Journal of Information & Optimization Sciences, 25 (2), 331-348 (2004). (EI)

5. Kuo, W.H., “ An analytical comparison of inventory costs of JIT and EOQ purchasing with defective products,” Journal of Information & Optimization Sciences, 26 (1), 219-231 (2005). (EI)

6. Kuo, W.H. and Yang, D.L., “Single-machine group scheduling with a time-dependent learning effect,” Computers and Operations Research, 33(8), 2099-2112 (2006 Aug.). (SCI)

7. Kuo, W.H. and Yang, D.L., “Minimizing the makespan in a single machine scheduling problem with a time-based learning effect,” Information Processing Letters, 97 (2), 64-67 (2006 Jan.). (SCI)

8. Kuo, W.H. and Yang, D.L., “Minimizing the total completion time in a single machine scheduling problem with a time-dependent learning effect,” European Journal of Operational Research, 174(2), 1184-1190 (2006 Oct.). (SCI)

9. Hsu, C.J., Kuo, W.H., Yang, D.L. and Chern, M.S., “Minmizing the makespan in a two-stage flowshop scheduling problem with a function constraint on alternative machines,” Journal of Marine Science and Technology, 14(4), 213-217 (2006 Dec.). (EI)

10. Kuo, W.H. and Yang, D.L., “Single machine scheduling problems with the time-dependent learning effect” Computers and Mathematics with Applications, 53 (11), 1733–1739 (2007 June). (SCI)

11. Yang, D.L. and Kuo, W.H., “Single-machine scheduling with an actual time-dependent learning effect,” Journal of the Operational Research Society, 58 (10), 1348-1353 (2007 Oct.). (SSCI)

12. Kuo, W.H. and Yang, D.L., “Single-machine scheduling problems with start-time dependent processing time” Computers and Mathematics with Applications, 53 (11), 1658-1664 (2007 June). (SCI)

13. Kuo, W.H. and Yang, D.L., “Single machine scheduling with past-sequence-dependent setup times and learning effects” Information Processing Letters, 102 (1), 22-26 (2007 April). (SCI)

14. Kuo, W.H., Lin, P.H. and Hwang, S.L., “A framework of perceptual quality assessment on LCD-TV” Displays, 28 (1), 35-43 (2007 Feb). (SCI)

15. Yang, D.L., Hsu, C.J. and Kuo, W.H., “A two-machine flowshop scheduling problem with a separated maintenance constraint” Computers & Operations Research, 35 (3), 876-883 (2008 March). (SCI)

16. Yang, D.L., Kuo, W.H. and Chern, M.S., “Multi-family scheduling in a two-machine reentrant flow shop with setups” European Journal of Operational Research, 187(3), 1160-1170 (2008 June). (SCI)

17. Kuo, W.H. and Yang, D.L., “A note on due-date assignment and single machine scheduling with deteriorating jobs” Journal of the Operational Research Society, 59(6), 857-859 (2008 June). (SCI)

18. Kuo, W.H. and Yang, D.L., “Parallel machine scheduling with time dependent processing times” Theoretical Computer Science, 393, Issue 1-3, 204-210 (2008 March). (SCI)

19. Kuo, W.H. and Yang, D.L., “Minimizing the makespan in a single-machine scheduling problem with the cyclic process of an aging effect” Journal of the Operational Research Society, 59 (3), 416-420 (2008 March). (SCI)

20. Kuo, W.H., Hsu, C.J. and Yang, D.L., “A note on unrelated parallel machine scheduling with time dependent processing times” Journal of the Operational Research Society, 60 (3), 431-434 (2009 March). (SCI)

21. Yang, D.L. and Kuo, W.H., “Single-machine scheduling with both deterioration and learning effects” Annals of Operations Research, 172(1), 315-327 (2009 Nov.). (SCI)

22. Yang, D.L. and Kuo, W.H., “A single-machine scheduling problem with learning effects in intermittent batch production” Computers & Industrial Engineering, 57(3), 762-765 (2009 Oct.). (SCI)

23. Lin, P.H., Kuo, W.H. and Hwang, S.L., “The development of a two-phase knowledge extraction framework on LCD image quality with knowledge creation process” International Journal of Business and Systems Research 4 (1), 22-41 (2010 Feb). 

24. Kuo, W.H. and Yang, D.L., Viewpoint on “Single-machine with a sum-of-actual-processing-time-based learning effect” Journal of the Operational Research Society  61, 352 - 355 (2010 Feb).

25. Kuo, W.H. and Yang D.L., “Erratum to “Machine scheduling with a general learning effect”” Mathematical Computer and Modelling 51 (Issue No. 5-6), 847-849 (2010, March)

26. Kuo, W.H. and Yang, D.L., ‘Note on “Single-machine and flowshop scheduling with a general learning effect model”and “Some single-machine and m-machine flowshop scheduling problems with learning considerations”’ Information Sciences 180, pp.3814 - 3816 (2010 Oct.) (SCI)

27. Kuo, W.H., “Optimal batch size and raw material ordering policy for a production system with a price-quantity discount rate” Journal of Statistics & Management Systems, 13(6), 1149-1163 (2010 Nov.). (EI)

28. Yang, D.L. and Kuo, W.H., “Some scheduling problems with deteriorating jobs and learning effects” Computers & Industrial Engineering, 58(1), 25-28 (2010 Feb.). (SCI)

29. Kuo, W.H., Hsu, C.J. and Yang, D.L., “Some unrelated parallel machine scheduling problems with past-sequence-dependent setup time and learning effects” Computers & Industrial Engineering, 61(1), 179-183 (2011 Aug.). (SCI)

30. Kuo, W.H. and Yang, D.L., “A note on due date assignment and single-machine scheduling with deteriorating jobs and learning effects” Journal of the Operational Research Society, 62(1), 206-210 (2011 Jan.). (SCI)

31. Lin, P.H. and Kuo, W.H.,Image quality on a mobile display under different illuminations” Perceptual and Motor Skills, 113(1), 215-228 (2011 June). (SSCI)

32. Hsu, C.J., Kuo, W.H. and Yang, D.L., “Unrelated parallel machine scheduling with past-sequence-dependent setup time and learning effects” Applied Mathematical Modelling, 35(3), 1492-1496 (2011 March). (SCI)

33. Yang, D.L. and Kuo, W.H., “Scheduling with deteriorating jobs and learning effects” Applied Mathematics and Computation, 218(5), 2069-2073 (2011 Nov.). (SCI)

34. Kuo, W.H. and Yang, D.L., “Single-machine scheduling with deteriorating jobs” International Journal of Systems Science, 43 (1), 132-139 (2012 Jan.) (SCI)

35. Kuo, W.H., Hsu, C.J. and Yang, D.L., “Worst-case and numerical analysis of heuristic algorithms for flowshop scheduling problems with a time-dependent leaning effect” Information Sciences, 184(1), 282-297 (2012 Feb.). (SCI)

36. Kuo, W.H., “Single-machine group scheduling with time-dependent learning effect and position-based setup time learning effect” Annals of Operations Research, 196(1), 349-359 (2012 July). (SCI)

37. Kuo, W.H., Yang, D.L., A note on “Proportionate flowshops with general position-dependent processing times” Information Processing Letters, 112(12), 479-480 (2012 June) (SCI)

38. Cheng, T.C.E., Kuo, W.H. and Yang, D.L. “Scheduling with a position-weighted learning effect based on sum-of-logarithm-processing times and job position” Information Sciences, 221(1), 490-500 (2013 Feb.). (SCI)

39. Yang, D.L., Cheng, T.C.E. and Kuo, W.H. “Scheduling with a general learning effect” International Journal of Advanced Manufacturing Technolog , 67 (Issue 1-4), 217-229 (2013 July)  (SCI).

40. Cheng, T.C.E., Kuo, W.H. and Yang, D.L. “Scheduling with a position-weighted learning effect” Optimization Letters, 8(1), 293-306 (2014 Jan.). (SCI)

 

會議論文

1. Kuo, W. H. and Hwang, S. L., (1996), “An interface design of real-time scheduling support system,” Proceedings of 5th International Conference on Human Aspects of Advanced Manufacturing: Agility & Hybrid Automation, 171-174.

2. Kuo, W. H. and Hwang, S. L., (1998), “A Human-computer interactive scheduling system in parallel machine systems,” Proceedings of 7th IFAC/IFIP/IFORS/IEA Symposium on Analysis, Design and Evaluation of Man-Machine Systems, 113-118.

3. 黃雪玲,郭文宏,徐擎智,施伯翰,(1998)5月,工程資料管理系統之人機介面-以STEP資料模式為基礎中華民國人因工程學會87年年會論文集,新竹。

4. Kuo, W.H. and Yang, D.L., (2000), “A study of the makespan in a two-machine flow shop scheduling system with a flexible maintenance,” Advances in Industrial Engineering – Theory, Applications and Practice V, Proceedings of the 5th Annual International Conference. ID326, 1-5.

5. Wang, C.H. and Kuo, W.H., (2000), “Free minimal warranty policy for an EMQ problem with an increasing failure rate in a production system,” Advances in Industrial Engineering – Theory, Applications and Practice V, Proceedings of the 5th Annual International Conference. ID327, 1-10.

6. 江文旺,何展效,郭文宏(2001)以基因法進行精密定位機構之參數調整, Proceedings of the 8th Conference of the Chinese Metrology Society, 71-78.

7. Kuo, W.H. (2003) 12, “A comparative model of inventory costs of the JIT and EOQ purchasing with defective items,” 中國工業工程學會九十二年度學術研討會論文集CIIE-2003-226

8. Kuo, W.H. (2004) 12, “An analytical comparison of inventory costs of JIT and EOQ purchasing with a price discount,” 中國工業工程學會九十三年度學術研討會論文集CIIE-200400172

9. Kuo, W.H. and Yang, D.L. (2004) 12, “Single-machine group scheduling problems with a time-dependent learning effect,” 中國工業工程學會九十三年度學術研討會論文集CIIE-200400173

10. Kuo, W.H., Hsu, C.J., Yang, D.L. and Chern, M.S. (2004) 12, “Minmizing the makespan in a two-stage flowshop scheduling problem with alternative machines,” 中國工業工程學會九十三年度學術研討會論文集CIIE-200400057

11. Yang, D.L., Kuo, W.H. and Chern, M.S. (2005) 10, “Minimizing the makespan in single-machine scheduling with a general time-dependent learning effect,” 第三屆流通與全球運籌論文研討會A-1~A-8.

12. Kuo, W.H., Yang, D.L. and Chern, M.S. (2005) 12, “A note on single-machine scheduling with a time-dependent learning effect to minimize the maximum lateness,” 中國工業工程學會九十四年度學術研討會論文集CIIE-083

13. Lin, P.H., Kuo, W.H., and Hwang, S.L., (2006), “A study of perceptual quality assessment on LCD-TV,” The 36th International Conference on Computers and Industrial Engineering, Taipei, Taiwan, R.O.C., June 20 – 23.

14. Lin, P.H., Kuo, W.H., Wen, C.H., and Hwang, S.L., (2006), “The application of knowledge creation process: a case of LCD-TV quality assessment”, Management International Conference 2006, Portorož, Slovenia, November 23 – 25.

15. Kuo, W.H., Hsu, C.J., and Yang, D.L. (2006)1223, “Minimizing the makespan on uniform parallel machines with a function constraint in a two-stage flowshop scheduling problem” 中國工業工程學會九十五年度學術研討會論文集

16. 吳進興,郭文宏 (2006)12,維修資源管理訓練遷移之研究 中國工業工程學會九十五年度學術研討會論文集

17. Lin, P.H., Kuo, W.H. and Hwang, S.L., “A study of perceptual quality assessment on LCD-TV” The 36th International Conference on Computers and Industrial Engineering, Taipei, Taiwan, R.O.C., June 20 - 23, 2006.

18. Lin, P.H., Kuo, W.H., Wen, C.H. and Hwang, S.L., “The application of knowledge creation process: a case of LCD-TV quality assessment” Management International Conference, Portorož, Slovenia, November 23 - 25, 2006.

19. Kuo, W.H. and Yang, D.L., “Single-machine scheduling with learning effects in intermittent batch production” The 19th Production and Operations Management Society Annual Conference, La Jolla, California, USA, May 9-12, 2008..

20. Kuo, W.H. and Yang, D.L., “A single-machine makespan minimization scheduling with a general learning effect” The CORS/INFORMS 2009 Joint International Meeting, Toronto, Canada, June 14 - 17, 2009.

21. Cheng T.C.E., Kuo, W.H. and Yang, D.L., “Single-machine scheduling problems with a position-weighted learning effect based on sum-of-logarithm-processing times and job position” 中國工業工程學會九十八年度學術研討會論文集, 台中, 台灣, December 12, 2009.

22. Kuo, W.H., Hsu, C.J. and Yang, D.L., “An unrelated parallel machine scheduling problem simultaneously with learning effect and past-sequence-dependent setup time” The 40th International Conference on Computers & Industrial Engineering, Hyogo, Japan, July 24 - 28, 2010.

23. Kuo, W.H., “Single-machine group scheduling problems with time-dependent learning effect and position-based setup time learning effect” The 7th East Asia SIAM Conference & RIMS Workshop on Methods in Industrial and Applied Mathematics, Fukuoka, Japan, June 27 - 29, 2011.

24.  Kuo, W.H. and Yang, D.L. “Minimizing the makespan on single-machine scheduling with deterioration effect and partial machine maintenance” XXVI EURO - INFORMS 26th European Conference on Operational Research, Rome, Italy, July 1-4, 2013.