| 11 |
張信良，廖年逢，趙立碁，2005
“簡易式家庭保全系統之開發，”
虎尾科技大學學報，Vol.
2, pp. 175-182。 |
| 12 |
Chang, S. L.
and
Liu, J. Y.,
2004,
“Development
of
a
Remote
Monitor
and
Diagnosis
System through a PC-Based Controller,” Journal of Internet Technology,
Vol. 5, No. 3. pp.279-288. |
| 13 |
Chang, S. L.,
2004,
A
New
Idea
to
Improve
Tooth Profile Precision
of
Involute
Spur
Gears
Manufactured
by
Hob
Cutters, Journal of Mechanical Engineering Science, Part C, Vol. 218,
pp. 327-343. (NSC89-2212-E-150-003) (SCI, EI) |
| 14 |
Twu, G. S.
and
Chang, S. L.,
2004,
A
Study
on
the
Tooth
Profiles
of
Involute
Spur
Gears Manufactured by Shaper Cutters, Journal of Chinese Society of
Engineers, Vol. 25, No. 2, pp. 105-113. (EI) |
| 15 |
Lee,
H. S., Chang, S. L., and Lin, K. H.,
2004, A Study of Design, Manufacture and Remote Control
for a Pneumatic Excavator, International Journal of Mechanical
Engineering Education, Vol.32, N. 4, pp. 345-361.(EI) |
| 16 |
張信良，曾煌棊，2004，
“塑膠切粒刀具新製程介紹與應力分析”，機械月刊，Vol.
30, No. 10, pp. 6-17. |
| 17 |
張信良，曾煌棊，2004， “新型滾齒刀之開發與測試”，Engineering
Science & Technology Bulletin, NSC, Vol. 75, pp. 43-47. |
| 18 |
Chang, S.L.,
2003,
Mathematical Modelling of a Helical Gear and its Corresponding
Cutter, International Journal of Engineering Simulation, Vol. 4, No. 4,
pp.16~21. |
| 19 |
Lee,
H. S. and Chang, S. L.,
2003,
Development
of
a
CAD/CAE/CAM
System For a
Robot
Manipulator ,” Journal of Material Processing Technology, Vol.
140, pp. 100-104. (SCI, EI) |
| 20 |
Chang, S. L.,
November
2003, Helix
Gash of
Hob
Cutter Manufactured by Milling Cutter,
Journal of Material Processing Technology,
Vol.
142, No. 2, pp. 569-575. (NSC91-2212-E-150-022) (SCI, EI) |
