Publications
A. Journal
Papers
1. Yan, H. S., Hsu, M. H., Fang, M. K., and Hsieh, W. H., "A Kinematic Approach for Eliminating the Discontinuity of Motion Characteristics of Cam-Follower System", Journal of Applied Mechanisms & Robotics, Vol. 1, No. 2, pp.1-6, 1994.
2. Yan, H. S. and Hsieh, W. H., "On the Order and Freedom of the Curve of RPCCR Linkages, "Journal of the Chinese Society of Mechanical Engineers, Vol. 19, No. 4, pp. 369-378, 1998. (EI)
3. Yan, H. S. and Hsieh, W. H., "On the Coupler Curve of 3R2C Linkages, "Transactions of the Canadian Society for Mechanical Engineering, Vol. 22, No. 3, pp. 251-267, 1998. (SCI, EI)
4. Hsieh, W. H. and Chen, C. W., "On the Improvement for External Geneva Mechanisms," Journal of Huwei Institute of Technology, Vol. 1, pp. 81-106, 1998. (In Chinese)
5. Hsieh, W. H., Lai, J. A., Cheng, H. C., Kuo, F. Y., and Chen, J. S., "Development of the Fuel Injection Controller with an 8051 Microprocessor for Engines," Journal of Huwei Institute of Technology, Vol. 5, pp. 151-162, 2002. (In Chinese)
6. Hsieh, W. H. and Chang, T. S.,"Creative Design of Metal Can Crushers with Eight Links and Triple Toggle Effects," Machine Design and Research, Vol. 20, Special issue, pp. 63-65, and 47, 2004. (In Chinese)(EI)(NSC 91-2622-E-020-011-CC) (NSC 92-2622-E-150-031-CC3)
7. Hsieh, W. H. and Chang, T. S., "Creative Design of Metal Can Crushers with Eight Links," Materials Science Forum, Vols. 505-507, pp. 925-930, 2006. (SCI, EI)(NSC 92-2622-E-150-031-CC3) (NSC 91-2622-E-020-011-CC3)
8. Chang, T. S, Hsieh, W. H., Hsieh, Y. A., and Yang, C. H., "Nondestructive Disassembly System for White Board Marker," Materials Science Forum, Vols. 505-507, pp. 955-960, 2006. (SCI, EI)(NSC89-2212-E-020-003)
9. Hsieh, W. H., "On the Geometry and Tolerance Design of Non-Conventional Spherical Geneva Mechanisms," Journal of the Chinese Society of Mechanical Engineers, Vol. 27, No. 1, pp. 99-107, 2006. (EI)(NSC 89-2212-E-150-004 & NSC 89-2218-E-150-007)
10. Hsieh, W. H., Hsu, C. H., and Lin, C. H., "On the Development of an Engine Control Device for Preventing Double Starting," Journal of Technology, Vol. 21, No. 3, pp. 269-276, 2006. (In Chinese) (NSC 93-2622-E-150-046-CC3)
11. Hsieh, W. H., Liu, J. Y., and Peng, C. C., "On the Structural Synthesis of Jet Propulsion Mechanisms for Bionic Jellyfishes with 3 and 5 Links," Journal of Technology, Vol. 21, No. 4, pp. 343-352, 2006. (In Chinese)(NSC 93-2212-E-150-028)
12. Jywe, W. Y., Liu, C. H., Hsieh, W. H., Shyu, L. H., Fang, T. H., Sheu, Y. H., Hsu, T. H., Hsieh, C. C., Developed of a Multi-Degree of Freedoms Measuring System and an Error Compensation Technique for Machine Tools, Journal of Physics: Conf. Ser., Vol. 48, pp. 761-765, 2006.
13. Liu, C. H., Jywe, W. Y., Chen. C. K., Hsieh, W. H., Shyu, L. H., Ji, Liu, V. T., Hsu, T. U., Hsu, T. H., and Chen, C. D., "Development of A four-Degrees-of-Freedom Diffraction Sensor," Journal of Physics: Conf. Ser., Vol. 48, pp. 196-201, 2006.
14. Hsieh, W. H., “An Experimental Study on Cam Controlled Planetary Gear Trains,” Mechanism and Machine Theory, Vol. 42, No. 5, pp. 513-525, 2007. (SCI, EI)(NSC 91-2212-E-150-023 and NSC 92-2212-E-150-035)
15. Jywe, W. Y., Chen, C. J., Hsieh, W. H., Lin, P. D., Jwo, H. H., and Yang, T. Y., "A novel simple and low cost 4 degree of freedom angular indexing calibrating technique for a precision rotary table," International Journal of Machine Tool and Manufacture, Vol. 47, No. 12-13, pp. 1978-1987, 2007. (SCI, EI)(NSC94-22 12-E150-007)
16. Lai, T. S., Hsieh, W. H., and Chen, G. T., "Geometrical Design of Roller Drives with Two-Tooth Difference,” Journal of the Chinese Society of Mechanical Engineers, Vol. 28, No. 6, pp. 641-648, 2007. (SCI, EI)(NSC94-2212-E-150-015)
17. Hsieh, W. H. and Peng, C. C., “On the Kinematic Synthesis of Jet Propulsion Mechanisms for Bionic Jellyfishes with 6 Links,” Transactions of the Canadian Society for Mechanical Engineering, Vol. 31, No. 3, pp. 289-299, 2007. (SCI, EI)(NSC 93-2212-E-150-028 & NSC 95-2221-E-150 -011)
18. Hsieh, W. H. and Wang, C. H., "Development of Tool Rotating Mechanisms for Turret Punch Presses," Journal of Technology, Vol. 22, No. 4, pp. 299-306, 2007. (In Chinese)
19. Hsieh, W. H., "A Kinematic Study on a Novel Press System," Key Engineering Materials, Vol. 364-366, pp. 595-600, 2008. (SCI, EI)(NSC 95-2622-E-150 -033-CC3)
20. Hsieh, W. H., Lai, T. S., and Chen, T. I., "Optimal Dimension Synthesis of Bionic Jellyfishes," Machine Design and Research, Vol. 24, Special Issue, 2008. (NSC93-2212-E-150-028 & NSC 95-2221-E-150 -011)
21. Hsieh, W. H. and Shu, K. M., "A Study on a Novel Press of Watt Type," Steel Research International, Special Edition, Vol. 1, pp. 731-739 2008,. (SCI, EI)(NSC 95-2622-E-150-033-CC3 & 97E-43-122)
22. Hsieh, W. H., "Kinematic Synthesis of Cam-Controlled Planetary Gear Trains," Mechanism and Machine Theory, Vol. 44, No. 5, pp. 873-895, 2009. (SCI, EI)(NSC 91-2212-E-150-023 and NSC 92-2212-E-150-035)
23. Hsieh, W. H., Lin, B. J., Liu, C.H., Hsieh, W. H., and Tsai, C. H., "On a Novel Ball Screw Mechanism," Machine Design and Research, Vol. 25, Special Issue, pp. 44-47, 2009. (NSC 98-2622-E-150 -064-CC3)
24. Hsieh, W. H. and Tsai, C. H., "A Study on a Novel Vibrating Conveyor," Key Engineering Materials, Vol. 419-420, pp. 45-48, 2010. (EI)(NSC 95-2622-E-150 -033-CC3)
25. Hsieh, W. H. and Tsai, C. H., "A Study on a Novel Quick Return Mechanism, "Transactions of the Canadian Society for Mechanical Engineering, Vol. 33, No. 3, pp. 139-152, 2009. (SCI, EI)(NSC 96-2221-E-150-049 and NSC 97-2221-E-150-019)
26. Hsieh, W. H. and Shu, K. M., "On the Warpage in the Lower Case of Lead-Acid Batteries," Advanced Materials Research, Vol. 97-101, pp. 51-54, 2010. (EI)(NSC 94-2622-E-150-045-CC3)
27. Lin B. J., Tu L. J., Jywe, W. Y., Hsieh, W. H., Liu, C. H., Zeng, R. Z., "Design and Analysis of the Die-Cutting mechanism," Machine Design and Research, Vol. 26, Special Issue, 2010.
28. Hsieh, W. H. and Tsai, C. H., "A Novel Mechanical Press of Stephenson Type," Steel Research International, Vol. 81, No. 9, pp. 694-697, 2010. (SCI, EI)(NSC 95-2622-E-150-033 and 96E-43-122)
29. Hsieh, W. H.
and Chen, T. I., "On the Resonance Analysis for Compliant Bionic
Jellyfishes," Science
30. Hsieh, W. H., and Tsai, C. H., "On a Novel Press System with Six Links for Precision Deep Drawing," Mechanism and Machine Theory, Vol. 46, No. 2, pp. 239-252, 2011. (SCI, EI)(NSC 99-2221-E-150-070 and 97E-43-122)
31. Hsieh, W. H. and Tsai, C. H., "Kinematic Study on a New Coil Winder of RSPC Type," Advanced Materials Research, Vols. 156-157, pp. 1488-1491, 2011. (EI)(NSC 97-2622-E-150-021-CC3 & 98AF28)
32. Hsieh, W. H.
and Lee,
33. Hsieh, W. H. and Tsai, C. H., "Kinematic Analysis and Design of a Novel Stephenson-I Press System for Precision Cutting," Advanced Science Letters, Vol. 4, No. 6, pp. 1993-1998, 2011. (SCI)(NSC 99-2221-E-150-070 and 97E-43-122)
34. Hsieh, W. H., "On
a Hybrid Variable Speed System (II)," Engineering Science
and Technology Bulletin, Vol. 4, No. 6, pp. 1993-1998, 2011.
(NSC97-2221-E-150-019)
35. Hsieh, W. H. and Chen, S. J.,
"Innovative Design of Cam-Controlled Planetary Gear
Trains," International Journal of Engineering and Technology
Innovation, Vol. 1, No. 1, pp. 1-11, 2011. (NSC 95-2622-E-150 -033-CC3)
36. Hsieh, W. H. and Tsai, C. H.,
"Design and Analysis of a Novel Vibrating
Conveyors," Advanced Science Letters, Vol. 9, pp. 62-67, 2012. (NSC
95-2622-E-150 -033-CC3)
37. Shu, K. M., Hsieh, W. H., and Chi,
C. W., “On the Design and Analysis of Acoustic Horns for Ultrasonic Welding,”
Advanced Materials Research, Vol. 1555, pp. 472-475, 2012. (EI)
38. Hsieh, W. H. and Tsai, C.
H., "Optimum Design of a Novel Press System with Stephenson-I Mechanism," Computers and Mathematics with Applications, Vol. 64, No. 5, pp.
897-907, 2012. (SCI, EI) (NSC 99-2221-E-150 -070)
39. Hsieh, W. H., and Tseng, C. Y., “Acceleration
Improvement for Coil Winders of RRRCC Type by Variable Input Speed Method,”
Journal of Vibroengineering, Vol. 14, No. 4, pp. 1459-1468, 2012. (SCI)(NSC
100-2221-E-150-018)
40. Shu, K. M., Hsieh, W. H., and
Yen, H. S., "Design and Analysis of Acoustic Horns for Ultrasonic machining,"
Applied Mechanics and Materials, Vol. 284-287, pp. 662-666, 2013. (EI)
41. Hsieh, W.
H., ”Kinetostatic and Mechanical Efficiency Studies on Cam-Controlled
Planetary Gear Trains-Part I Theoretical Analysis,” Indian Journal of
Engineering and Materials Sciences, Vol. 20, No. 3, pp. 191-198, 2013. (SCI,
EI)(NSC
91-2212-E-150-023 and NSC 92-2212-E-150-035)
42. Hsieh, W. H., ”Kinetostatic and
Mechanical efficiency Studies on Cam-Controlled Planetary Gear Trains-Part II
Design and Experiment,” Indian Journal of Engineering and Materials Sciences,
Vol. 20, No. 3, pp. 199-204, 2013. (SCI, EI)(NSC 91-2212-E-150-023 and NSC 92-2212-E-150-035)
43. Lai, T. S and Hsieh, W. H., "Computer Aided Design of
Cycloid Drives with Hyperbolic Tooth-Profiles,” Journal of the Chinese Society of Mechanical Engineers, Vol.
34, No. 3, pp. 229-234, 2013. (SCI, EI)(NSC 95-2212-E-150-013)(Paper No. CSME
44. Shu, K. M., Hsieh, W. H., and Yen, H. S., "On the Design
and Analysis for Ultrasonic Welding,” Transactions of the Canadian Society for
Mechanical Engineering, Vol. 37, No. 3, pp. 905-916, 2013. (SCI, EI)
45. Hsieh, W. H. and Tseng, C. Y., “Structural Synthesis of Spatial 4-Link Mechanisms for Coil Winding,” Applied Mechanics and Materials, Vols. 423-426, pp. 1809-1812, 2013. (EI) (NSC 97-2622-E-150-021-CC3)
46. Hsieh, W. H., Lin, G. H, and Tsai, C. H., "Kinematic Analysis of a Novel Vibratory Bowl Feeder," VIBROENGINEERING PROCEDIA, Vol. 2, pp. 92-97, 2013.(EI)
47. Hsieh, W. H. and Shih N. N., "On a Inline Conveyor Resonantly Driven by Piezoelectric Actuators," Journal of Vibroengineering, Vol. 16, No. 5, pp. 2164-2170, 2014. (SCI)(NSC 102-2815-C-150-012-E)
48. Hsieh, W. H., and Tsai, C. H., “On
the Kinematic of a Coil Winder of RCRC Type,” Advanced Materials Research,
Vols. 1030-1032, pp 1219-1223, 2014. (EI)(NSC 97-2622-E-150-021-CC3)
49. Hsieh, W. H, Chang, K. B., "Modeling and Control of a Novel Ball Screw Mechanism," Journal of Marine Science and Technology, Vol. 22, No. 6, pp. 754-761, 2014.
50. Hsieh, W. H., and Tsai, C. H., “On the Kinematic
of Generalized Oldham Coupling,” Key Engineering Materials, Vol. 661, pp 10-15, 2015. (EI)(NSC
98-2622-E-150-064-CC3)
In Processing
Ｂ. Conference Papers
2.
Shieh, P. I., Tsai, M. P., and Hsieh, W. H. "An Approach to
Integrate Turing and Milling Tasks into Flexible Manufacturing Cell," The 2nd
International Conference on Automation Technology, 1992.
3.
Yan, H. S.,
Hsu, M. H., Fong, M.K., Hsieh, W.H., "A Kinematic Approach for Eliminating
the Discontinuity of Motion Characteristics of Cam-Follower System," The 3rd National Applied Mechanisms & Robotics Conference,
1993.
4.
Yan, H. S.,
Tsai, M. C., Hsu, M. H., Fong, M.K., Hsieh, W.H., "Kinematic Method For
Improving Motion Characteristics of Cam-Follower Systems," The 23th
Biennial Mechanisms Conference, Proceedings of the 1994 ASME Design Technical
Conferences, Part 2(of 3), Sep. 11-14, Vol. 71,
5.
Hsieh, W. H.
and Liu, J. Y.,
"Application of Computer Aided
Drafting for the Dimensional Synthesis of Planar Mechanism,” Proceedings of the
Ninth National Conference on China Mechanism, Nanjing, China, pp. 85-88, 1994. (In Chinese)(NSC 83 - 0117-C-150-047 E)
6. Hsieh, W. H. and Tsai, M. P., "Computer Aided Design and Manufacturing for Cylindrical Cams,” Proceedings of the Twelfth National Conference on Chinese Mechanical Engineering Conference (CSME), Chia-Yi, Taiwan, pp. 457-466, 1995. (In Chinese)
7.
Yan, H. S.
and Hsieh, W. H., "On the Coupler Curve of RCPCR
Linkages," Proceedings of DETC98, 1998 ASME International Design
Engineering Technical Conference, Sep. 13-16,
8.
Hsieh, W. H.
and Huang, S. J., "The Geometrical Design of Non-Traditional Spherical
9.
Hsieh, W. H.
and Huang, S. J., "The Computer Aided Design and Manufacturing of
Spherical Cams," The Ninth National Conference on Automation, May 25-26,
10.
Hsieh, W. H. and Huang, S. J., "On the Tolerance Design of
Non-Traditional Spherical mechanisms," The Twenty-sixth National
Conference on Mechanics, Dec. 20-21,
11.
Hsieh, W. H.,
"Geometrical Design of Cam-Controlled Planetary Gear Trains," The Sixth
National Mechanisms and Machine Science Conference, Nov. 12-13,
12.
Hsieh, W. H., Chang,
T. S., Chen, B. J., Hsu, K. Y., "Creative Design of Metal Container
Squeezing Devices with Six-Bar Type," The Proceedings of the Twelfth National Conference on Chinese
Mechanical Engineering Conference - Solid Mechanics and Design, Taipei, Taiwan, pp. 83-89, 2003. (In Chinese)(NSC 91-2622-E-020-011-CC)
13.
Hsieh, W. H., Chang,
T. S., Chen, B. J., Hsu, K. Y., "Creative Design of Metal Can Crushers
with Eight Links and Double Toggle Effects," The Thirteenth National Conference on
Automation, June 17-18, Taipei, Taiwan, 2004. (In Chinese)(NSC 92-2622-E-150-031-CC3)
14.
Shyu, R. F.,Yang, H. H., Ho, C. T. Hsieh, W. H., and
Weng, F. T., "Polygon Microlens Array
Design and Fabrication Using Thermal Pressing in LIGA-Like Process," 2004
SPIE International Symposium, SMART MATERIALS, NANO-, AND MICRO-SMART SYSTEMS,
Dec. 12-15, Sydney, Australia, 2004. (SCI)(EI)
15.
Hsieh, W. H., Lin, L.
Z., Lin, J. J., Fan, G. F., Chen, J. H., Huang, C. C., Huang, G. Z., "On
the Analysis and Simulation of Cam-Controlled Planetary Gear Trains," The 2005
MSC Taiwan Workshop of Virtual Product Development, Dec. 01, Taipei, Taiwan. (In Chinese)(NSC 90-2212-E-150-004) (NSC
91-2212-E-150-023)
16.
Hsieh, W. H., Chen, Y.
L., Li, M. S. and Shiu, J. R., "On the Analysis and Simulation of
Generalized Oldham Couplings," The 2005 MSC
17.
Hsieh, W. H.,
Liu, J. Y., and Peng, C. C., " the 22nd National Conference on Chinese
Mechanical Engineering Conference, , 2005 (In Chinese)(NSC 93-2212-E-150-028)
18. Hsieh, W. H., Liu, J. Y., and Peng, C. C., "On the Structural Synthesis of Jet Propulsion Mechanisms with Five Links for Bionic Jellyfishes," The eighth National Mechanisms and Machine Science Conference, Nov. 02, Chong-Li, Taiwan, 2005. (In Chinese)(NSC 93-2212-E-150-028)
19.
Hsieh, W. H.,
“On the Geometry and Tolerance Design of Non-Conventional Spherical
20.
Hsieh, W. H.
and Chang, T. S., “Creative Design of Metal Can Crushers with Eight Links,” 2005
International Conference of Advanced Manufacture, Nov. 28 - Dec. 02,
21.
Chang, T. S,
Hsieh, W. H., Hsieh, Y. A., and Yang, C. H., “Nondestructive Disassembly System for
White Board Marker,” 2005 International Conference of Advanced Manufacture,
Nov. 28 - Dec. 02, Taipei, Taiwan, 2005.
22. Liu, C. H., Jywe, W. Y., Chen, C. K., Hsieh, W. H., Shyu, L. H., Ji, L. W., Liu, V. T., Hsu, T. H., Chen, C. D., “Development of A four-degrees-of-freedom diffraction sensor,” ISIST 2006 Conference, Harbin, China, Aug. 8 to 12, 2006.
23.
Jywe, W. Y.,
Liu, C. H., Hsieh, W. H., Shyu, L. H., Fang, T.
H., Sheu, Y. H., Hsu, T. H., Hsieh, C. C., “Developed
of a Multi-Degree of Freedoms Measuring System and an Error Compensation
Technique for Machine Tools,” ISIST 2006 Conference, Harbin, China, Aug. 8 to 11,
2006.
24. Jywe, W. Y., Liu, C. H., Teng, Y. F., Chen, C. J., Shen, J. C., Hsieh, W. H., Wang, Y. C., “Development of a Laser Based Dual-Axial Five-Degrees-of-Freedom Measurement System for an X-Y Stage,” 8th Biennial ASME conference on Engineering System Design and Analysis, July 4-6, Torino, Italy, 2006.
25.
Shih, H. R., Shu,
K. M, Hsieh, W. H., “A Study of Electrical
Discharge Grinding Using a Rotary Disk Electrode,” International Manufacturing
Leaders Forum, Oct. 23-25 ,
26. Hsieh, W. H., Shu, K. M, Huang, K. W., and Lin, B. Y., "Moldflow Analysis of Upper Case of Batteries," The Fifth National Conference on Precision Manufacturing, Nov. 11, Kaohsiung, Taiwan, 2006.( In Chinese)(NSC 94-2622-E-150-045-CC3)
27.
Hsieh, W. H., Liu, J. Y., and Peng, C. C., "On the Structural
Synthesis of Jet Propulsion Mechanisms with Six Links for Bionic
Jellyfishes," The Ninth National
Mechanisms and Machine Science Conference, Nov. 10-11,
28.
Hsieh, W. H.,
Hwang, Y. L., Peng, C. C., and Cheng, T. Y.," the 22nd
National Conference on Chinese Mechanical Engineering Conference, Tainan,
Taiwan, 2005 (In Chinese)(NSC
95-2221-E-150 -011)
29. Hsieh, W. H. Lin, G. T., Chiu, S. F. Li, C. H., and
Lee, C. C., "On the Kinetostatic Analysis of Cam-Controlled Planetary
Gear Trains," The Thirtieth
National Conference on Mechanics, Dec. 15-16, Changhwa, Taiwan, 2002. (In Chinese) (NSC 92-2212-E-150-035 & NSC
95-2815-C-150-012-E)
30. Hsieh, W. H., "A
Study on a Novel Press System with Motion Adjustable," the First Asia
Pacific Conference on Optics Manufacture 2007 (APCOM 2007), Jan 11-13,
31. Jywe, W. Y., Liu, C. H., Hsu, T. H., Jeng, Y. R., Hsieh, W. H., Shyu, L. H., Fang, T. H., Ji, L. W., and Hsieh, T. H., "Development of a High Resolution Three-Dimensional Optical Vibrometer," The First Asia Pacific Conference on Optics Manufacture 2007 (APCOM 2007), Jan 11-13, Hong Kong, 2007.
32. Hsieh, W. H., Lai, T. S, and Chen, S. J, "Structural Synthesis of Cam-Controlled Planetary Gear Trains with 4 and 5 Links," The 12th World Congress in Mechanism and Machine Science (IFToMM 2007), June 17 -21, Besançon, France, 2007. (NSC 91-2212-E-150-023 and NSC 92-2212-E-150-035)
33. Lai, T. S., Hsieh, W. H., and Chen, G. T., "Geometrical Design of Roller Drives with Two-Tooth Difference," The Ninth International Conference on Automation Technology (Automation 2007), June 13-15, Taipei, Taiwan, 2007.
34. Hsieh, W. H., Shu, K.
M., Wu, M. L. and Yang, Y. H., "The Design of Acoustic Horns for
Ultrasonic Welding," The Ninth International Conference on Automation
Technology (Automation 2007), June 13-15, 2007,
35. Shu, K. M., Jywe, W. Y., Liu, C. H., Lin, Y. S., Teng, Y.
F., and Hsieh, W. H., “ Development of an Electric-Optical Measurement System
for Rotation Spindle Error,” International Conference on Advances and Trends in
Engineering Materials and their Applications (ATEMA 2007), August 6-8,
Montreal, Canada, 2007.
36. Hsieh, W. H., Shu, K. M, and Jhan, W. P., "Moldflow Analysis of
Lower Case of Batteries," The 24th
National Conference on Chinese Mechanical Engineering Conference, Nov. 23-24,
Chong-Li, Taiwan, 2007. (In Chinese)(NSC 94-2622-E-150-045-CC3).
37.Hsieh,
W. H. and Lee, I. C. "Phase Lead
Compensation of Cam-Controlled Planetary Gear Trains," the Tenth National Mechanisms and
Machine Science Conference, Nov. 30, Taichung, Taiwan, 2007. (In Chinese)(NSC
96-2221-E-150-049)
38. Hsieh,
W. H. and Chen, T. I., "Strength Design of Compliant Bionic
Jellyfishes," The Tenth National Mechanisms and Machine Science Conference, Nov.
30,
39. Hsieh,
W. H. and Tsai, C. H.,
"A Study on a Novel Oscillating Conveyor," The Tenth National Mechanisms and
Machine Science Conference, Nov. 30,
40. Hsieh, W. H., Lee, W. G, and Yang, M. D., "Design of Motion Adjustable Standard Cams," The Conference of Chang-Yun-Chiag University Union, Dec. 20, Yunlin, Taiwan, 2007.(In Chinese)(NSC 95-2622 -E-150-033-CC3)
41. Hsieh, W. H., Chiou, T. H, and Liu, J. H., "Design of Motion Adjustable Standard Cams," The Conference of Chang-Yun-Chiag University Union , Dec. 20, Yunlin, Taiwan, 2007..(In Chinese)
42. Hsieh, W. H. "A Novel
Standardized Cam Systems with Motion Adjustable," International Conference
on Control and Automation (ICCA'08), March 19-21,
43. Hsieh, W. H., Shu, K. M., Jhan,
W. P., and Shih, H. R., "On
the Wire Sweep and Cost in IC Encapsulation," 2008 Conference on
Precision Machinery and Manufacturing Technology (PMMT 2008), May 21-23,
44. Hsieh, W. H. and Lee, I.
C. "Modelling and Control of Cam-Controlled Planetary Gear Trains," The
2008 International Conference on Modelling, Identification and Control
(ICMIC 2008), June 29 - July 2,
45. Hsieh, W. H., Lai, T. S.,
and Chen, T. I., "Optimal Dimension Synthesis of Bionic Jellyfishes," The International Mechanisms and Machine
Science Conference 2008,
46. Hsieh, W. H. and Shu, K. M., "A Study on a Novel Press of
Watt Type, "The 12th International Conference on Metal Forming 2008, September
21-24,
47. Hsieh, W. H., Shih, H. R., and Chen, T.
I., "On Compliant Bionic Jellyfishes with Resonance Input," The Eleventh National Mechanisms and
Machine Science Conference, Nov. 14,
48. Hsieh, W. H., Lin, G. H. and Tsai, C. H., "A Study on a Novel Vibrating and Oscillating Conveyor," The Eleventh National Mechanisms and Machine Science Conference, Nov. 14, Hsinchu, Taiwan, 2008. (In Chinese)(NSC 97-2815-C-150-002-E)
49. Hsieh, W. H., Li, I. C., Tsai,
C. H., "Structural Synthesis of Hybrid Variable Speed Systems," The Eleventh National Mechanisms and
Machine Science Conference, Nov. 14,
50. Shu, K. M., Hsieh, W. H., Jhao, Y. B., and Jhang, S. F., "The Study of Ultrasonic Aided Wire Drawing Testing Machine," The 25th National Conference on Chinese Mechanical Engineering Conference, Nov. 21-22, Changhwa, Taiwan, 2008. (In Chinese)
51. Hsieh, W. H., Cheng, C. L., and Shu, K. M., "On an Automatic Towel Longitudinal Cutting Machine with Cost Efficiency," 2009 Conference on Precision Machinery and Manufacturing Technology (PMMT 2009), May 22-24, Pingtung, Taiwan, 2009. (In Chinese)(E-43-250)
52. Shu, K. M., Hsieh, W. H., Jhao, Y. B., and You, C. P., "The Design of Acoustic Horns for Ultrasonic Insertion," 2009 Conference on Precision Machinery and Manufacturing Technology (PMMT 2009), May 22-24, Pingtung, Taiwan, 2009. (In Chinese)(E-43-250)
53. Shu, K. M., Hsieh,
W. H., and Chen. C.C., "The Design of Acoustic Horns for Ultrasonic
Insertion," The 9th International Symposium on Measurement Technology and
Intelligent Instruments (ISMTII2009), June 29 - July. 2,
54. Hsieh, W. H., Lin, B. J., Liu, C.H., Hsieh, W. H., and Tsai, C. H., "On a Novel Ball Screw Mechanism," 2009 Conference of Mechanism and Machine Science on the Applied in China (2009 CCAMMS), Aug. 18-22, Wuhan, China, 2009. (NSC 98-2622-E-150 -064-CC3)
55. Hsieh,
W. H. and Tsai, C. H.,
"A Study on a Novel Vibrating Conveyor," The 2nd International
Conference on Advanced Design and Manufacturing (ADM2009), Sep. 24-26,
56. Hsieh,
W. H. and Huang, T. J., "On the Mechanical Efficiency of Cam-Controlled Planetary Gear Trains," The Twelfth National Mechanisms and
Machine Science Conference, Nov. 06,
57. Hsieh,
W. H. and Tsai, C. H., "A Study on a Novel Press System with Six
Links,"the Twelfth
National Mechanisms and Machine Science Conference, Nov. 06,
58. Hsieh, W. H. and Chen, J. Y., "PID Motion Control of Cam-Controlled Planetary Gear Trains," The Twelfth National Mechanisms and Machine Science Conference, Nov. 06, Chiayi, Taiwan, 2009. (In Chinese)(NSC 96-2221-E-150-049 & NSC 97-2221-E-150-019)
59. Hsieh,
W. H. and Shu, K. M., "On the Warpage in the
Lower Case of Lead-Acid Batteries, " The International Conference on Manufacturing
Science and Engineering (ICMSE 2009), Dec. 26-28,
60. Liu, C. H., Lee. H. W., Lin, C. T., Jywe, W. Y., , Shen, J. C., Fang. T. H., Hsieh, W. H. Chen, Y. F., and
Wen, C. H., "Optically Monitored Z-Tilts Positioning Compensating Stage
with Capacitor Insertion Method," Regional Conference on Mechanical and
Aerospace Technology (RCMEAE2010), February 9 – 10, Bali, Indonesia, 2010.
61. Hsieh, W. H., Tsai, C. H., Tseng,
and Lee, M. d., "Structural Synthesis for Coil
Winders of RSPC Type," The 18th International Conference on Automation Technology, June
25-26, 2010. (In Chinese)(NSC 97-2622-E-150-021-CC3
& 98AF28)
62. Hsieh,
W. H., Liang, Y. S., Cheng, W. H., Tsai, C. H., Tseng, C. Y.,
and Lee, M. T., "Structural Synthesis of Coil Winders of a
RCCC Type," 2010 Conference on Precision Machinery and Manufacturing
Technology (PMMT 2011), May 20-22,
63. Lin B. J., Tu L. J., Jywe, W.Y., Hsieh, W. H., Liu, C. H., and
Zeng, R. Z., "Design and Analysis of the
Die-Cutting mechanism," The International Mechanisms and Machine
Science Conference 2010 (CCMMS2010), Shanghai, China, July 21-25, 2010.
64. Hsieh, W. H. and Tsai, C.
H., "A Novel Mechanical Press of Stephenson Type," The 13th
International Conference on Metal Forming 2010, September 19-22, Toyohashi,
Japan, 2010. (NSC 95-2622-E-150-033-CC3 & E-43-122)
65. Hsieh, W. H. and Chen,
T. I., "On the Resonance Analysis for Compliant Bionic
Jellyfishes," The 3rd International Conference of Bionic Engineering
(ICBE'10), Sep. 14-16, 2010,
66. Hsieh, W. H. and Tsai, C.
H., "Kinematic Analysis and Design of a Novel Stephenson-I Press System
for Precision Cutting," The 2010 International Symposium on Mechanical Science and
Technology (ISMST 2010), September 25-29, Guangzhou, China, 2010.
67. Hsieh, W. H. and Tsai, C.
H., "Kinematic Study on a New Coil Winder of RSPC Type," The
2010 International Conference on Advances in Materials and Manufacturing
Processes (ICAMMP 2010), Nov. 6-8,
68. Hsieh, W. H. and Chang, S. L., "Sliding Mode Control of Cam-Controlled
Planetary Gear Trains," The 34th National Conference on Theoretical and
Applied Mechanics, November 19-20,
69. Hsieh,
W. H. and Tseng, C. Y., "Kinematic Synthesis
of Coil Winders of RCCC Type," 2011 Conference on Precision Machinery and Manufacturing
Technology (PMMT 2011), May 20-22,
70. Hsieh, W. H. and Chang, K.
B., "Motion Control of a Novel Ball Screw Transmission System," The14th National Mechanisms and Machine
Science Conference, Nov. 02,
71. Hsieh, W. H., and Tsai, C. H., "Design and Analysis of a Novel Vibrating Conveyors," The First International
Conference on Engineering and Technology Innovation 2011 (ICETI2011), Nov.
11-15,
72. Hsieh, W. H. and Lai, G. D., "On a
Bionic Jellyfish with Artificial Muscles Driven," 2012 Conference on
Precision Machinery and Manufacturing Technology (PMMT 2012), May 21-23,
Pingtung, Taiwan, 2012. (In Chinese)(NSC 95-2221-E-150 -011)
73. Hsieh, W. H. and Tseng, C.
Y., "Variable Speed Input at Minimum Output Acceleration of Coil Winders
of RRRCC Type," The Fifteenth
National Mechanisms and Machine Science Conference, Nov. 02,
74. Hsieh, W. H. and Hwang, Y.
C., "Simulation on Motion Control of a Novel Press of Six-Link Mechanisms
Link Mechanisms with External Loads," The Fifteenth National Mechanisms and
Machine Science Conference, Nov. 02, Tainan, Taiwan, 2012. (In Chinese)(NSC 99-2212-E-150
-070)
75. Hsieh, W. H. and Liang, J.
Z., "Mechanical Efficiency Optimization of Cam-Controlled Planetary Gear
Trains," The Fifteenth
National Mechanisms and Machine Science Conference, Nov. 02, Tainan, Taiwan, 2012. (In Chinese)(NSC
91-2212-E-150-023 and NSC 92-2212-E-150-035)
76. Hsieh,
W. H. and Tseng, C. Y., "On the Dynamic
Balancing of Coil Winders of RRRCC Type," 2013 Conference on
Precision Machinery and Manufacturing Technology (PMMT 2013), May 25-27,
77. Hsieh, W. H., and Tseng, C.
Y., “Structural Synthesis of Spatial 4-Link Mechanisms for Coil Winding,” The
2013 3rd International Conference on Applied Mechanics, Materials and
Manufacturing (ICA
78. Hsieh, W. H. and Shih, N.
N., "On a Inline Conveyor Resonantly Driven by Piezoelectric Actuators," The Sixteenth National Mechanisms and
Machine Science Conference, Nov. 01,
79. Hsieh, W. H. and Tseng, S.
Y, "On the Compliant Bionic Jellyfishes Driven Resonantly by Piezoelectric
Actuators," The Sixteenth National Mechanisms and Machine Science
Conference, Nov. 01,
80. Hsieh, W. H. Chen, M. S, Yeh,
K. S., and Huang, Z. M., "On the Measurement of a New Golf
Ball Testing Machine," The
Sixteenth National Mechanisms and Machine Science Conference, Nov. 01,
81. Hsieh, W. H., Lin, G. H.,
and Tsai, C. H., "Kinematic Analysis of a Novel Vibratory Bowl
Feeder," International Conference VIBROENGINEERING 2013, November 22-24,
82. Hsieh, W. H. and Lai, G.
D., "On the Variable Input Speed of Four-Bar-Linkages Considering
Functional and Energy-Saving Requirements," 2014 Conference on
Precision Machinery and Manufacturing Technology (PMMT 2014), May 23-25,
83. Hsieh, W.
H., and Tsai, C. H., “On the Kinematic of a Coil Winder of RCRC Type,”
2014 International Forum on Mechatronics, Information and Civil Engineering
(IFMIC2014), July 30-31,
84. Hsieh, W.
H., Kao, Ma, Z., C., S., "On the Measurement
of Diameter and Compressibility of Golf Ball Testing Machine," The 22th National
Conference on Automation, Nov. 14-15,
85. Hsieh, W.
H., Huang, Z. C., Chang, C. Z., "Simulation of Bowler vibrator
Driven by Piezoelectric Conveyor," The 22th National Conference on Automation, Nov. 14-15,
86. Hsieh, W. H., and Tsai, C. H., “On the
Kinematic of Generalized Oldham Coupling,” International Conference of Precision
Machinery and
Manufacturing Technology (ICPMMT2015), May 22-24,
1.